1. Firmly hand-tighten connection to the cyclinder valve by turning the handwheel clockwise.Do not use a wrench.

2. Slowly open the cyclinder valve.Cyclinder locks inflator in place leak-free.

3. Feed ribbon through guide hole

1. Close cyclinder valve firmly.

2. Release pressure by pushing down on the push valve or by tilting the tilt valve outlet.

3. Unscrew hand-tight connection and remove inflator from cyclinder

1. Place the latex or foil balloon over the tapered flex-tip outlet and tilt valve to inflate balloon.

2. When balloon has reached desired size,remove it from the outlet.

Each Cylinder is supplied to our customers based on minimum 2000psi.

P.S.I in other words means the maximum amount of air pressure that should be in your cylinder.

The number of balloons you can blow will very much depends on your size of balloons.

The mentioned number of balloons in our website is based on our past experience of blowing 11" balloons.

If your balloons are smaller (e.g 7" to 10") you will get more than what prescribed. otherwise you will have lesser number of balloon.

All helium tank cylinders need to be secured; Helium is a non-toxic, non-flammable gas, however it is dangerous to breathe in the gas from the cylinder.

We recommend that you transport the helium tank cylinder in the trunk of your car secured.

Responsibility for equipment remains with the renter from time of receipt to time of return.

Please be sure equipment is secured when not in use and protected from the weather.

We do charge for missing, broken or rain damaged parts.